The VMC-T600 high-speed drill & tap center from Dongguan Rui'an Precision Machinery runs at a maximum spindle speed of 20,000 rpm with a BT30 taper, driven by a 5.5 kW spindle motor. It is built for high-efficiency drilling and tapping of small precision parts — 3C electronics housings, precision hardware and batch-machined components.

Key specifications:

• Spindle speed: up to 20,000 rpm (BT30, 5.5 kW)
• Travel: X/Y/Z 600/400/330 mm
• Rapid traverse: 48 m/min on all three axes
• Cutting feed: 100–24,000 mm/min
• Table: 700×420 mm, max load 300 kg
• Tool changer: 21-tool arm-type servo ATC (BT30)
• Positioning accuracy: ±0.005/300 mm; repeatability ±0.003 mm
• Control: SYNTEC 22MA
• Spindle bearings: FAG/NSK; ballscrews: PMI silver series; bed: HT300 high-strength cast iron

Why high spindle speed matters: for drilling and tapping, 20,000 rpm keeps cycle times short and hole quality consistent on small-diameter holes. Combined with 48 m/min rapids and a 21-tool servo ATC, the VMC-T600 handles batch production without a tool-change bottleneck.

VMC-T600 vs VMC-T700: choose the T600 for X/Y/Z 600/400/330 mm travels; if you need more than 600 mm in X, the VMC-T700 offers 700/450/330 mm travel at the same 20,000 rpm spindle speed. the VMC-T700 offers 700/450/330 mm travel and 20,000 rpm.

Full product page: https://www.ruiancnc.com/1477.html Contact us for quotation: https://www.ruiancnc.com/contact.html